BitScope SP01A

BNC Port Adapter (for Bitscope 10)
BNC Port Adapter
Product Summary
Order Code SP01A
Description Dual channel BNC adapter for BitScope 10. Includes 6 logic inputs and switchable waveform and clock generator outputs.
Comment for Bitscope 10.
Price
Quantity USD (US Dollar)
1+ $ 32.45
5+ $ 25.95
10+ $ 20.45

Product Information

SP01A is a dual channel BNC adapter for BitScope Mini. It allows the use of industry standard oscilloscope probes. It also supports simultaneous use of the logic inputs and connection to the waveform and clock generator outputs. The SP01A adapter connects via the BitScope Smart Port allowing 1:1, 10:1, 100:1 and other standard attenuating oscilloscope probes as well as current, differential or any other type of BNC terminated sensor designed for use with 1MΩ/20pF oscilloscope inputs.

The BNC sockets are supplied with ring nuts and washers so SP01A can be bench mounted. The logic, waveform generator and clock signals appear on the 16-pin header between the BNC sockets. The analog inputs are replicated on the 16-pin header and every input has an associated ground pin below it (for twisted pair connection). Two terminator plugs are included to ground any pair of inputs or to route the waveform generator and/or clock outputs to the BNC sockets. Read More...

FeatureSpecification
Analog Inputs (Standard Probe) 2
Analog Inputs (Twisted Pair) 2
Logic Inputs (3.3V/5V) 6
Comparator Channels 2 (via analog inputs)
Waveform Generator 1 (via L4)
Clock Generator 1 (via L5)
Input Impedance (Analog) 1M Ω / 20pF
Input Impedance (Digital) 100k Ω / 5pF
Voltage Range (Direct) -7.5 V ~ +10.8 V (1:1 probe)
Voltage Range (Scaled) -75 V ~ +108 V (10:1 probe)
Device Connection IDC-26 (Smart Port)
Power Requirement None
Pass Through Power 5V (via pin 2)
Operating Temperature 0 °C to 40 °C
Storage Requirements -40 °C ~ +40 °C / 5 % ~ 95 % RH
Dimensions (W x D x H) 60 x 50 x 20 mm
Weight (Net) 32g
EL18A | E&OE