How to Install BitScope

How to Install BitScope on Raspberry Pi with Raspbian

Raspberry Pi NOOBS Installer

Many people have asked how to install BitScope Software on Raspberry Pi. It's easy if you use the official Raspbian image.

Here we explain how to install Raspbian from scratch to check compatibility and then how to install the BitScope Software.

First up though, check out the BitScope Quick Start Guide.

Installing Raspbian on Raspberry Pi

Raspbian can be downloaded as an image (which you must then copy to an SD card) or it can be installed as an option for the New Out Of Box Software installer (NOOBS).

We think NOOBS is brilliant, especially for first time Raspberry Pi users so we've used this method to install Raspbian (if you really want to do it the hard way, see this guide).

Read on to learn how we installed Raspbian using NOOBS and then installed BitScope DSO and connected to the SYDNEY BitScope. To start, download http://downloads.raspberrypi.org/NOOBS_lite_latest.

The NOOBS version we recommend is the lite edition which is a relatively small download because it grabs most of the operating system via the Internet when the initial image first starts.

The Raspberry Pi Foundation's Quick Start Guide has the NOOBS installation details and when we ran it, we found it all to be quite painless.

Update: since we published this page the Raspberry Pi Foundation released the new Raspberry Pi 2.

It's identical to the old models in terms of software but we blogged about it and created this YouTube video as part of our review. The video includes full step by step instructions explaining how to install Raspbian and BitScope Software on Raspberry Pi and we recommend it if you prefer video instructions.

Installation Steps

In a nutshell, installation steps (as shown in the video) are as follows:

  1. Download the NOOBS installer (zip file) to your PC or Mac,
  2. Unzip and copy the contents to a fresh SD card on your PC or Mac,
  3. Connect your Raspberry Pi to a monitor, keyboard, mouse and your network.
  4. Plug in the SD card and power on the Raspberry Pi,
  5. Choose Raspbian from the list of options and Install,
  6. Reboot (the first time) and do some configuration,
  7. Reboot (again) to start Raspbian running,
  8. Open the default web browser and visit bitscope.com / pi
  9. Download the BitScope DSO software to your home directory,
  10. Open a terminal window and install it.

The only step above that may benefit from little further explanation is Step 6, configuration with raspi-config.

Here we've chosen the following:

  1. Resize the file system to use the entire SD card,
  2. Choose to boot to the desktop (instead of command line), and
  3. Enable the SSH server (so we can log in remotely).

All these steps are explained in detail in the video or you can read on below for further instructions.

Installing BitScope Software

We recommend BitScope DSO for Raspberry Pi but other BitScope software is also available.

For this we simply fire up Raspberry Pi's default web browser (which was Midori when these screenshots were take but the new one looks very similar). Simply grab the package via the download menu on the BitScope Pi Home Page.

Choose BitScope DSO from the Download menu as shown.

Select BitScope DSO for download.

Click Download and then the download link to get the BitScope DSO package.

Download BitScope DSO

Save AS a new file in a convenient location (we recommend /tmp/). Update: some people have reported that there'a a better way to continue from here. For the update, please see How to Install BitScope DSO on Raspberry Pi.

Save to a convenient location.

Open a root terminal.

Open a root terminal.

Install the BitScope DSO package and execute the bitscope-dso command.

Install and start BitScope DSO.

You can also execute it from the menu and you don't need to execute it as root as we've done here. Next, assuming you want to talk to the SYDNEY BitScope, click the SETUP button at the top right of the DSO application and choose ETHERNET. If you have a locally connected USB BitScope, choose USB instead.

Select Ethernet.

Choose SYDNEY as the connection address. If you have a locally connected Network BitScope, type in its hostname or IP address instead. If you have a USB BitScope, choose the port to which it's connected (most likely /dev/ttyUSB0).

Select SYDNEY.

Click Ok and then POWER to start BitScope DSO. If your Raspberry Pi is connected to the Internet, you should then see the SYDNEY BitScope and its waveforms appear.

SYDNEY BitScope.

At this point you are connected from your Raspberry Pi via the Internet to a Network BitScope in our Sydney R&D lab. It's likely to be a little slow and it may change without prompting (if someone else is using it at the same time) but it should give you the idea about how DSO and BitScope work together.

Related Posts

BitScope
Build a powerful mixed signal workstation with one simple 3D print !Sep 3
Raspberry
Raspberry Pi Zero W, a wireless wonder for only $10 !Feb 28
Raspberry
Raspberry Pi 3 Launch and BitScope BladeFeb 29
BitScope
Physical Computing with Raspberry Pi and BitScope!Dec 01
Raspberry
BitScope Micro with Raspberry Pi Touchscreen Display!Sep 09
Raspberry
BitScope, Ozberry & Pimoroni at Sydney Mini Maker Faire!Aug 12
Raspberry
BitScope Blade for Raspberry Pi at Hannover Maker Faire!Jun 05
Software
BitScope DSO 2.9 Now Available.Jun 02
BitScope
Getting Started with BitScopeMay 08
Education
BitScope Micro & Raspberry Pi in Education at BETTJan 21
BitScope
BitScope Connection Ports ExplainedDec 19
BitScope
BitScope Micro and Oscilloscope ProbesDec 10
Education
Electronic Measurement with BitScope & Raspberry PiNov 12
BitScope
Hands on with BitScope Micro at electronica 2014Nov 11
BitScope
BitScope Micro Video Tutorial with Farnell element14Nov 10
BitScope
BitScope Micro and Raspberry Pi at electronica 2014!Nov 06
BitScope
BitScope Micro element14 Webinar Review.Nov 03
BitScope
BitScope Micro Webinar with element14!Oct 29
BitScope
element14 launches BitScope Micro for Raspberry Pi!Oct 27
BitScope
BitScope Micro Diagnostic Port Explained.Aug 16
Raspberry
MagPi talks Raspberry Pi B+, HATs & BitScope.Aug 04
Raspberry
Raspberry Pi B+ BitScope x 4 = 8 analog + 32 logic !Aug 01
Raspberry
Automated Waveform Analysis with Raspberry PiNov 09
BitScope
Sydney BitScope, Online Demo Updated.Oct 30
Software
BitScope Touch Screen User InterfaceOct 28
Raspberry
Network access for USB BitScopes via Raspberry Pi.Oct 24
Education
BitScope Ed at OzBerryPi, Presentation Review.Oct 21
Raspberry
BitScope and friends at OzBerryPi Maker SpaceOct 20
Raspberry
How to Install BitScope DSO on Raspberry PiOct 18
Raspberry
Electronic Projects Lab for Raspberry PiOct 17
Education
BitScope Ed, an Educational Blog about Electronics.Oct 09
Raspberry
Visualizing sound with Sonic Pi and BitScopeOct 05
Raspberry
How to Install Raspbian and BitScope on Raspberry PiSep 29
Raspberry
High speed data acquisition with Raspberry PiSep 25
Raspberry
BitScope Software for Raspberry Pi OscilloscopeSep 27
Raspberry
BitScope Raspberry Pi OscilloscopeSep 25
More...