Theremin Museum Exhibit

An Interactive Museum Installation built with BitScope & Blade Uno.

The MAAS PowerHouse Museum↗ has created an interactive exhibit to demonstrate how a Theremin works.

BitScope Blade Uno Theremin Museum Exhibit

A Theremin is a novel electronic musicial instrument, invented almost by accident by Leon Theremin in the 1920s.

Why did they do this?

The Powerhouse Museum offers visitors a wide range of interactive exhibits.

Advocates of learning by doing and having fun while you do it, they sought to create an entertaining exhibit where visitors could play the theremin hear the results.

However, it was not enough just to be able to hear the instrument play, they wanted to be able to visualise the sounds it produced to help explain how the instrument works.

They sought a cost effective solution that could be built into the exhibit itself. It needed to be reliable, start without operator intervention and continute to work 24x7 when powered on.

Built with BitScope, Blade Uno and Raspberry Pi

MAAS used BitScope Blade Uno together with a Raspberry Pi, BitScope and LCD monitor to build the exibit.

BitScope Blade Uno Theremin Museum Exhibit

Together with the off-the-shelf accessories shown here they had everything needed to build the installation.

The Raspberry Pi, powered and mounted on the BitScope Blade Uno, provided the compute platform to drive the display (via HDMI) and it ran the BitScope application.

The BitScope itself, also mounted on the Blade, was connected (via USB) to the Raspberry Pi and powered by the Blade.

The Theremin output was connected via splitters (so they could also be connected to a sound amplifier) and BNC terminated coaxial cables to the analog inputs via a BitScope probe adapter.

The entire assembly was mounted on the exhibit via the Blade's M3 mounting tabs, and the power, HDMI and audio cables routed through the back.

The entire assembly is powered by a single 12V adapter.

BitScope Blade Uno Theremin Museum Exhibit

BitScope Pi on Display

The team at MAAS decided this assembly should be part of the exhibit itself, so they housed it in a transparent case.

Mounted on the exhibit next to the display and above the Theremin it resulted in a visually appealing exhibit for visitors to interact with, hear the sounds produced and watch the waveforms as they played.

We enjoyed working with the MAAS team to put this together and we're impressed with the museum exhibit they built.

BitScope Pi Industrial

This exhibit proved to be a great example of what a Raspberry Pi, BitScope and a BitScope Blade Uno can do and it's not limited to just exhibit installations.

With the launch of the new BitScope Blade range with our friends at element14 earlier this week, we'll publish more examples like this explaining how BitScope, Blade and Raspberry Pi can be deployed.

BitScope Blade Uno Industrial Example

For example, shown here is a Blade Uno with a Raspberry Pi, a PiFace Digital 2↗ HAT and a pair of BitScopes (underneath).

An assembly like this offers the ability to capture, analyse and display four high speed analog channels and 16 digital via the BitScopes while also controlling up to ten digital outputs (two via relays).

All sorts of industrial modules like this can be built with Raspberry Pi, BitScope and the full range of Raspberry Pi HATs from third parties using BitScope Blade Uno.

If you have specific application requests or examples of your own, contact us!

About the Theremin

BitScope is the perfect tool to display and analyze what the Theremin can do and we're big fans of all sorts of electronic musical instruments, so we thought we'd post some information about the Theremin itself.

Leon Theremin plays his instrument.

The Theremin is the world's first electronic musical instrument.

Invented in 1920 by Lev Termen, also known as Leon Theremin, it was a by-product of research into proximity sensors in Russia around that time.

It's played without touching it.

The Theremin consists of a box-like body with two antennas: one is a straight vertical rod which controls the pitch (usually on the right for right-handed players), the other is a horizontal loop (usually on the left) shaped somewhat like a cane handle which controls the volume. The pitch and volume of the note are controlled by the distance of the hands from the antennas.

The block diagram below outlines the basic circuit.

The Theremin employs heterodyning, an electronic technique that mixes two oscillators operating at different frequencies to produce a new lower frequency equal to the difference between them.

In the case of the Theremin, it's the pitch you hear.

Theremin block diagram.

The pitch oscillator operates at a very high (RF) frequency making it very senstive to any changes in the capacitance in resonsant circuit from which it's built.

Moving your hand around the pitch antenna changes the capacitance which changes the frequency of this oscillator and therefore the heterodyne pitch that is produced.

The volume control also works via proximity of the performer's hand to the other antenna.

In this case it changes the "efficiency" of the a separate RF oscillator.

The closer your hand is to the antenna the lower the amplitude of the oscillator.

This amplitude is turned into a volume signal using an envelope detector (a diode rectifier) and applied to the output changing the volume heard at the output.

In the case of the MAAS exhibit, the Theremin output is displayed as a waveform and (optionally) as a spectrum. As visitors play the Theremin they can see the waveform pitch (visible as a changing number of waveform cycles on the display) and the volume (visible as the vertical size of the waveform).

While they did not do this, it would be possible to use the BitScope to display the operation of the pitch and volume oscillators inside the Theremin and analyse how its electronic circuits work but we'll leave that for another day !

GF10A

Related Posts

BitScope
Build a powerful mixed signal workstation with one simple 3D print !Sep 3
BitScope
Farnell element14 interviews BitScope CEO Bruce TullochMar 29
BitScope
How to assemble and get started using BitScope Blade.Feb 20
Raspberry
Heatwave no problem for BitScope Blade and Raspberry Pi !Feb 10
BitScope
Raspberry Pi Applications built with BitScope Blade.Feb 6
Raspberry
BitScope Blade Uno Raspberry Pi Weather Station in Nepal.Jan 24
BitScope
BitScope Designs and element14 launch new Blade for Raspberry Pi !Jan 23
Education
BitScope, Blade & Raspberry Pi at the Sydney Maker Faire!Aug 20
BitScope
Physical Computing with BitScope, Blade and Raspberry Pi.May 27
Raspberry
Build servers with Raspberry Pi and BitScope Blade.Mar 16
BitScope
Raspberry Pi 3 Model B unboxed & reviewed with Duo Pi.Mar 07
Raspberry
Raspberry Pi 3 Launch and BitScope BladeFeb 29