BitScope Blade Examples

Raspberry Pi Applications built with BitScope Blade.

BitScope Blade Reloaded is our computing infrastructure platform for Raspberry Pi.

It is available in three editions; Uno, Duo and Quattro which power and mount one, two or four Raspberry Pi and support the use of Raspberry Pi and BitScope accessories including HATs, displays, cameras and other devices.

Blades may be used stand-alone or combined to build large computing platforms.

In this post we'll focus on some stand-alone examples.

BitScope Blade Uno and HAT

What does Blade do ?

BitScope Blade solves the "power and mounting problem" using Raspberry Pi.

A common problem when using single board computers like Raspberry Pi is how to power it reliably. The other common issue is how to mount it robustly.

These problems become more challenging when peripherals and expansion hardware such as HATs and USB are used.

BitScope Blade solves these problems making it easy to build small stand-alone servers, routers and workstations up to full sized compute clusters, private clouds, industrial IoT, edge and fog computing platforms, industrial data acquisition and control systems. HATs and almost any other peripheral compatible with Raspberry Pi may be used with BitScope Blade.

Blade Uno, the ideal "motherboard" for Raspberry Pi & HAT

The simplest Blade application is a motherboard for Raspberry Pi, a HAT and optionally one or more USB devices.

BitScope Blade Uno and BitScope Micro

For example, this BitScope Blade Uno↗ is configured with Raspberry Pi, Pimoroni Explorer HAT↗ and BitScope Micro↗ to build a complete self-contained mixed signal test and measurement system.

Blade Uno provides power and mounts the Raspberry Pi, the HAT and BitScope.

It accepts any source of power from 9V to 48V (so long as it's 10W or more) with power connected via the 2.1mm socket or via the Blade tabs.

Additional accessories such as Raspberry Pi Display and one HUB Expansion Card or other SPI, I2C Serial or GPIO connected devices can also be used.

The entire assembly can be mounted via the Blade's M3 mounting tabs or simply sat on a flat surface using the stand-offs.

The Raspberry Pi network port is available for network connections and/or a monitor (via HDMI), keyboard and mouse (via USB) and audio (via the 3.5mm). Full access to all the Raspberry Pi I/O is avaiable via the Explorer HAT. A "hat tip" to Pimoroni for an exceptionally handy HAT! We use this setup to help teach new users about logic protocols with BitScope Logic and BitScope Micro :)

Blade Duo, the ideal platform for tiny redundant "micro-servers".

BitScope Blade Duo Redundant Server Example

For example, this Blade Duo mounts a pair of Raspberry Pi 3 and WDLabs’ PiDrive↗ mounted on the back.

The PiDrive is perfect for this (see our earlier post about building servers with Raspberry Pi). The PiDrive is powered via a Raspberry Pi and Blade Duo ensures there is plenty of power to drive it.

Blade Duo has the same HUB Expansion and I/O as Blade Uno and it offers auxiliary power connectors for external devices underneath each Raspberry Pi.

Using the Raspberry Pi 3 built-in WiFi the pair of Raspberry Pi can be networked to each other and/or a connected network switch or WiFi access point to configure them as a pair of servers or a router and server pair. The range of applications is huge, essentially anything you can think of using a pair of Raspberry Pi, e.g. UTM gateways, WiFi access points, VPN IPSec routers etc. We'll post more about this soon.

Blade Quattro, the industrial cluster platform for Raspberry Pi

A more sophisticated application for BitScope Blade, using Quattro, is a four node compute cluster.

BitScope Blade Quattro Cluster Example

Blade Quattro extends Blade Duo to power and mount up to four Raspberry Pi.

Compute cluster applications such as a small private clouds, a build or render farms, web CMS any many other multi- node applications compatible with Raspberry Pi can be used.

Multiple Blades (of any edition) can be used to build very large compute clusters and a range of rack mount solutions are available to enable to physical construction, commissioning and deployment of large cluster computing systems of up to hundreds of nodes.

For an excellent example of a small cluster built with Blade Quattro, check out Andy Clark's recent series in element14 about his Render Farm↗. In future posts we'll describe cluster computing examples ranging from 2 nodes to 200 that can be built with BitScope Blade Quattro, Duo and Uno. We'll also publish details of some software solutions such as Docker and explain some of our own tools designed to make Raspberry Pi programming and cluster management with Blade easy.

We designed BitScope Blade to unlock the huge potential of Raspberry Pi for use in industrial applications.

Nothing beats Raspberry Pi on price/performance, availability and viable software solutions.

We look forward to seeing what applications you decide to build with Blade!

Visit BitScope in element14 Community for more.

GF10G

Related Posts

BitScope
How to assemble and get started using BitScope Blade.Feb 20
Raspberry
Heatwave no problem for BitScope Blade and Raspberry Pi !Feb 10
Education
An Interactive Museum Exhibit built with BitScope Blade.Jan 27
Raspberry
BitScope Blade Uno Raspberry Pi Weather Station in Nepal.Jan 24
BitScope
BitScope Designs and element14 launch new Blade for Raspberry Pi !Jan 23
Education
BitScope, Blade & Raspberry Pi at the Sydney Maker Faire!Aug 20
BitScope
Physical Computing with BitScope, Blade and Raspberry Pi.May 27
Raspberry
Build servers with Raspberry Pi and BitScope Blade.Mar 16
BitScope
Raspberry Pi 3 Model B unboxed & reviewed with Duo Pi.Mar 07
Raspberry
Raspberry Pi 3 Launch and BitScope BladeFeb 29