BitScope MP01 is dual channel mixed signal BNC adapter for BitScope Micro. It connects standard oscilloscope probes.
- Supports Standard Oscilloscope Probes.
- Attenuating, Differential & Current Probes.
- Connects BNC Terminated Coaxial Cables.
- Terminators and Adjustable Signal Routing.
- Twisted Pairs for Logic Inputs & Outputs.
- Additional Twisted Pairs for Analog Inputs.
- Dedicated Logic Channel Inputs (L3..L0).
- Shared Comparator Channels (CHA/L7,CHB/L6).
- Switchable Waveform Generator (AWG/L4).
- Switchable Clock Generator (CLK/L5).
We call it BitScope Hammerhead: a universal I/O adapter for BitScope Micro.
In addition to the two BNC connectors, MP01 includes a 16-pin socket and a pair of terminators for connection to all the BitScope Micro inputs and outputs. It plugs into BitScope Micro's Diagnostic Port (via an IDC-10 on the back) so the signals and features of the diagnostic port remain available when accessed via MP01.
Use Standard Oscilloscope Probes with BitScope Micro!
MP01 makes it possible to use standard oscilloscope probes with BitScope Micro.
Passive probes that have 1:1, 10:1, 100:1 or other attenuation ratios can be used. It also supports active differential probes, current probes and most other types of probe which are BNC terminated and designed for use with standard scope inputs.
This is possible because despite its tiny size and appearance, BitScope Micro has electrically compatible analog inputs with 1MΩ/20pF impedance so compensation circuits in standard probes will work the same with BitScope Micro and MP01.
If you need to connect only one probe or you want an in-line solution we recommend Tom Thumb (MP02) instead.
Coaxial Cables and BNC Connections
MP01 is not just for oscilloscope probes. It also allows the use use BNC terminated cables for connection with other equipment that uses this common standard.
This makes MP01 ideal for data acquistion and related applications where RG-58 cabling with BNC termination is commonly used. If an application requires 50Ω termination, pass-through terminators like PAC-01 are available.
Twisted Pair Mixed Signal Connections
In addition to the BNC connected analog inputs, MP01 provides connections for BitScope Micro's six logic inputs and waveform and clock generator outputs.
This is done via the integrated 16-pin header between the BNC sockets.
Every input and output has an associated ground pin located directly below it which allows the use of twisted pairs for low noise connection to circuits under test, especially working at the very low levels supported by BitScope Micro's Macro Mode.
Well connected with Assignable Inputs & Outputs
Extending the BitScope Micro Diagnostic Port, MP01 offers even more flexible signal routing options.
In addition to the BNC inputs, the analog channels also appear on the header.
Analog (or logic) signals connected via either set of analog inputs are routed to BitScope Micro's logic channels 6 and 7 via its built-in comparators.
This means it's possible to capture up to 8 logic channels at once where two channels can be set to switch at an adjustable level which is ideal for unusual logic families or specialised signal standards (e.g. bipolar or negative voltage logic).
Flexible Signal Routing
Colour coded shorting plugs are supplied which allow up to two unused inputs to be shorted for ground reference. In the case of the analog inputs it also prevents noise or crosstalk from unconnected inputs. The shorting plugs may also be used to route the waveform generator output to the CHB BNC socket and the built-in clock generator to CHA.
The keycard shows how this is done.
Using the shorting plugs the CHA BNC connector can be connected to ground, CLK/L5 or L3 and CHB BNC connector connected to ground, AWG/L4 or L0.
In addition to grounding, waveform and clock outputs, connecting either analog input to an adjacent logic channel reduces the input impedance of the analog input from 1MΩ to 100kΩ which in can be very handy if the lower input impedance is required.
The fully programmable signal control provided by the BitScope Micro Diagnostic Port is available via MP01. For example the four logic channels can be set as active low pull-downs to configure a connected circuit for up to 16 states of operation.
|MP01 (100:1)||MP01 (10:1)||BS05 (1:1)|
Supports Wide Range of Voltages
This table enumerates full scale voltage ranges available with MP01 when used with BitScope Micro and a 1:1, 10:1 and 100:1 probe.
It shows the maximum peak-to-peak signal that can be captured at full resolution with (8 bits in normal mode and up to 12 bits in macro mode).
With BitScope DSO this is simply a matter of right-clicking the probe scale widget and choosing the right scale. In the example shown here, a probe scaling of 2:1 has already been chosen but the prescaler (1:5) is about to be selected instead.
Many scaling options are available to support the wide range of oscilloscope probes available because all of them can be used with BitScope Micro and MP01.
Bench, Lab or Rack Mount
Coming soon are some mounting and case design ideas for MP01. The BNC sockets are supplied with ring nuts and washers so MP01 can be permanently mounted (with appropriate metalwork) and BitScope Micro plugged in as and when required.
BitScope Micro Oscilloscope Probe Adapter Specifications
EL16D | E&OE
|Analog Inputs (Standard Probe) ||2|
|Analog Inputs (Twisted Pair) ||2|
|Logic Inputs (3.3V/5V) ||6|
|Comparator Channels ||2 (via analog inputs)|
|Waveform Generator ||1 (via L4)|
|Clock Generator ||1 (via L5)|
|Input Impedance (Analog) ||1M Ω / 20pF|
|Input Impedance (Digital) ||100k Ω / 5pF|
|Voltage Range (Direct) ||-7.5 V ~ +10.8 V (1:1 probe)|
|Voltage Range (Scaled) ||-75 V ~ +108 V (10:1 probe)|
|Device Connection ||IDC-10 (Micro Port)|
|Power Requirement ||None|
|Operating Temperature ||0 °C to 40 °C|
|Storage Requirements ||-40 °C ~ +40 °C / 5 % ~ 95 % RH|
|Dimensions (W x D x H) ||60 x 50 x 20 mm|
|Weight (Net) ||28g|
|Raspberry Pi 3 Launch and BitScope Blade||Feb 29|
|Physical Computing with Raspberry Pi and BitScope!||Dec 01|
|BitScope Micro with Raspberry Pi Touchscreen Display!||Sep 09|
|BitScope, Ozberry & Pimoroni at Sydney Mini Maker Faire!||Aug 12|
|BitScope Blade for Raspberry Pi at Hannover Maker Faire!||Jun 05|
|BitScope DSO 2.9 Now Available.||Jun 02|
|Getting Started with BitScope||May 08|
|BitScope Support Board via Trello||May 01|
|BitScope Micro In-Line Data Acquisition||Apr 02|
|Where to Buy BitScope Micro & Accessories.||Feb 19|
|BitScope ARM Platform Compatibility||Feb 10|
|Bootstrapping Raspberry Pi 2 for BitScope||Feb 05|
|Raspberry Pi 2 and BitScope Performance||Feb 02|
|BitScope Micro + BNC Adapter Bundle||Dec 23|
|BitScope Connection Ports Explained||Dec 19|
|BitScope Micro and Oscilloscope Probes||Dec 10|
|Raspberry Pi Model A+ or B+ or B+ Slimline?||Nov 14|
|Hands on with BitScope Micro at electronica 2014||Nov 11|
|BitScope Micro Video Tutorial with Farnell element14||Nov 10|
|BitScope Micro and Raspberry Pi at electronica 2014!||Nov 06|
|BitScope Micro element14 Webinar Review.||Nov 03|
|BitScope Micro Webinar with element14!||Oct 29|
|element14 launches BitScope Micro for Raspberry Pi!||Oct 27|
|BitScope Micro Diagnostic Port Explained.||Aug 16|
|MagPi talks Raspberry Pi B+, HATs & BitScope.||Aug 04|
|Raspberry Pi B+ BitScope x 4 = 8 analog + 32 logic !||Aug 01|
|BitScope Micro, now available at Pimoroni!||Jun 01|
|BitScope Model 10 or BitScope Micro?||Apr 25|
|BitScope Micro, what's in the box?||Apr 17|
|BitScope Micro Questions & Answers||Apr 12|
|BitScope Micro (New Product) for Raspberry Pi!||Apr 11|
|BitScope Workshop at OzBerryPi||Apr 8|
|BitScope Library V2 API Guide Published||Mar 21|
|Optimizing real-time waveform display for Raspberry Pi||Mar 17|
|Volume purchase discounts now available online!||Mar 11|
|BitScope Documentation Updated Online||Mar 05|
|BitScope DSO Version 2.6 Production Release||Mar 03|
|Low cost networked data acquisition with Raspberry Pi.||Dec 17|
|BitScope Server, shared remote access for any BitScope!||Dec 15|
|BitScope DSO updated for Server Compatibility||Dec 14|
|Collaborative Solutions, Online & Interactive Education.||Dec 09|
|Powerhouse ThinkSpace Digital Learning||Dec 04|
|The Sydney Mini Maker Faire Review.||Nov 28|
|BitScope Ed at the Sydney Mini Maker Faire!||Nov 20|
|BitScope Library V2.0 and Proto Scope Application||Nov 15|
|BitScope DSO, Logic, Chart, Meter and Library updated||Nov 12|
|Automated Waveform Analysis with Raspberry Pi||Nov 09|
|Reducing Quantization Noise with BitScope||Nov 08|
|Breadboard One, the 4 Bit Up/Down Counter||Nov 07|
|Using a USB BitScope with any Linux system.||Nov 05|
|Sydney BitScope, Online Demo Updated.||Oct 30|
|BitScope Touch Screen User Interface||Oct 28|
|Network access for USB BitScopes via Raspberry Pi.||Oct 24|
|BitScope is virtually indestructible, just as we intended!||Oct 23|
|BitScope Ed at OzBerryPi, Presentation Review.||Oct 21|
|BitScope and friends at OzBerryPi Maker Space||Oct 20|
|Vertical Offsets and Dual Channel Display||Oct 19|
|How to Install BitScope DSO on Raspberry Pi||Oct 18|
|Breadboard One, a typical Mixed Signal Circuit.||Oct 17|
|Electronic Projects Lab for Raspberry Pi||Oct 17|
|Dual Channel Active Differential Probe (New Product).||Oct 15|
|BitScope Smart Port. The clever connection.||Oct 12|
|BitScope Ed, an Educational Blog about Electronics.||Oct 09|
|Why the oscilloscope update rate is important.||Oct 06|
|Visualizing sound with Sonic Pi and BitScope||Oct 05|
|BitScope Software Blog Launched||Oct 04|
|Differential measurements matter, here's why...||Oct 01|
|How to Install Raspbian and BitScope on Raspberry Pi||Sep 29|
|BitScope Website Upgrade and Blog Launch||Sep 29|
|High speed data acquisition with Raspberry Pi||Sep 25|
|BitScope Software for Raspberry Pi Oscilloscope||Sep 27|
|BitScope DSO 2.7 update (for Raspberry Pi only)||Sep 24|
|BitScope Raspberry Pi Oscilloscope||Sep 20|
|BitScope||BitScope DSO Tutorial Examples||Sep 09|