BitScope Meter

BitScope Waveform Meter

BitScope Meter

Automatic Oscilloscope and Waveform Analysis for BitScope

BitScope Model 10 BitScope Model 325 BitScope Model 445

BitScope Meter is a scope, AC/DC voltmeter and frequency meter in an easy to use application.

BitScope Meter | Minimized View

It's like a waveform generator in reverse.

Plug-in any waveform and Meter will lock on and display it while simultaneously reporting waveform parameters in realtime.

Features and benefits include:

  • Real-time waveform display
  • Dynamic parameter reporting
  • Automatic frequency/period meter
  • Peak, RMS & Min/Max voltmeters
  • DC mean and offset voltmeters
  • Sophisticated auto-locking trigger
  • Fast point & click operation

Meter is an ideal tool to quickly view and measure AC/DC signals and voltages.

There are no complicated parameters, just connect the signal and view the results.

Simple Point & Click Operation

Meter runs in a single window divided into three sections as shown at the top of this page.

  1. An oscilloscope waveform display and measurement parameters display (top left).
  2. The main focus parameter, channel and input control display (bottom left).
  3. An optional control panel for connection, setup and device control (right).

The control panel can be hidden to optimize the display to view just the waveform and parameters.

Operation is automatic, just click the RUN button or the spacebar on the keyboard to start. Click on any parameter around the waveform display to select it to have focus below the display.

Meter Focus Parameter Display

The focus parameter display uses 4 digits precision and a moving decimal point, familiar to anyone who has used a digital multimeter or frequency meter.

Above the focus parameter is information about the connected BitScope and below it the Meter version.

To the right are the channel selection, AC/DC coupling and signal source widgets which are changed with mouse clicks.

Advanced controls and application configuration options are available via the menus at the top of the main window and almost all operations have keyboard short-cuts available.

Online help and a user guide is built-in.

Meter Voltage Parameters

Convenient Voltage Measurement

Meter measures and reports five waveform voltages automatically:

  • V p-p: the peak to peak waveform voltage.
  • V rms: the root mean square voltage of the waveform.
  • V mean: the mean (DC) voltage of the waveform over an integer number of periods or the total capture duration if no frequency is detected.
  • V max and V min the absolute maximum and minimum voltages over the waveform period.

Meter continuously measures these voltages and adjusts BitScope's input ranges and voltage scaling to optimize the measurements and maintain a consistent view of the waveform on the display.

A ground reference can also be displayed, especially useful for waveforms sitting on DC offsets, and probe scaling can be applied when using attenuating oscilloscope probes.

Sophisticated Frequency Detection

While Meter is very easy to use, internally it employs some sophisticated analysis techniques to makes its measurements, especially when measuring waveform periods and frequencies.

Most frequency meters simply count zero crossings per unit time. This works for simple waveforms but fails for many real-world signals, especially in data driven mixed signal environments or when looking at waveforms comprising more than one frequency.

In contrast Meter employs a powerful autocorrelation detector which can lock on to different frequencies in the one signal and even find frequencies in a waveform which is not obviously periodic.

Periodic Psuedo Random Waveform

[1] Periodic Psuedo Random Waveform

Frequency Detector Function

[2] Waveform Detector Function


For example, waveform [1] is a digitally generated "noise" signal displayed by Meter.

Psuedo Random Waveform Frequency

[3] Waveform Frequency

Overlaying the signal is a timing grid showing that it is not noise at all but is instead a periodic waveform.

The detector function [2] peaks indicate the waveform periods and the calculated frequency is reported in the measurement panel [4] as 3.906 kHz with about ±10Hz precision (worst case).

Being digitally generated, this signal also has a much higher (clock) frequency embedded within it and Meter can be used to measure this frequency too.

Embedded Clock Signal

[4] Embedded Clock Signal

Clock Detector Function

[5] Clock Detector Function


Waveform [4] is from the same signal but now locked on the much higher clock component of the waveform. Again the timing grid overlays the waveform showing the waveform periods and this time the waveform periods clearly visible by inspection.

Psuedo Random Clock Frequency

[6] Clock Frequency

The detector function [5] now looks quite different but its salient feature is the row of peaks indicating the detected waveform periods as before.

The reported frequency this time is 500 kHz with about ±20Hz precision.

From this we can deduce that the data sequence generating the original psuedo random signal comprises 128 steps per period. The same techniques can be applied to measure multiple frequencies in many complex periodic waveforms.

Of course Meter will work just as well with very simple waveforms too !

Advanced User Controls

In normal usage Meter operates without the need for any special setup or configuration but sometimes it may be necessary tweak some settings to optimize your measurements.

Meter Options Menu

The Options menu shown here provide access to these controls when they're needed:

  1. Voltage Range: to set the desired meter scale (mV, V or kV).
  2. Probe Attenuation: to set up Meter for the type of probes you're using.
  3. Waveform Display: provides controls to change how waveforms are displayed.
  4. Frame Averaging: allows adjustments to parameter measurement accuracy.
  5. Capture Buffer Size: and advanced control for managing capture.
  6. Frequency Detector: advanced controls for adjusting the detector algorithm.

The online help that come with Meter explains these controls in detail.

Multi-Application Operation

Meter is designed to be used stand-alone or as a partner application for BitScope DSO.

Multi-Application Compatibility

When used with BitScope DSO you can run both applications with a single BitScope at the same time using Meter to get a handle on the signal quickly and DSO to analyze it in much greater detail.

Simply toggle capture between each application.

Meter shares its setup, configuration and calibration settings with BitScope DSO but it can also recalibrate the operation of BitScope to suit its purposes independently of DSO if required.

BitScope Compatibility

Meter supports all current BitScopes and old models back to BS300S (since 2003).

Cross-platform PC Compatibility

Like most other BitScope software, Meter is cross-platform compatible with Windows 8, 7, and XP, Mac OS X and most popular Linux distributions.

Related Posts

Raspberry
Raspberry Pi 3 Launch and BitScope BladeFeb 29
BitScope
Physical Computing with Raspberry Pi and BitScope!Dec 01
Raspberry
BitScope Micro with Raspberry Pi Touchscreen Display!Sep 09
Raspberry
BitScope Blade for Raspberry Pi at Hannover Maker Faire!Jun 05
BitScope
Getting Started with BitScopeMay 08
BitScope
BitScope Support Board via TrelloMay 01
BitScope
BitScope Micro In-Line Data AcquisitionApr 02
BitScope
BitScope ARM Platform CompatibilityFeb 10
Raspberry
Bootstrapping Raspberry Pi 2 for BitScopeFeb 05
Raspberry
Raspberry Pi 2 and BitScope PerformanceFeb 02
Raspberry
Raspberry Pi Model A+ or B+ or B+ Slimline?Nov 14
BitScope
Hands on with BitScope Micro at electronica 2014Nov 11
BitScope
BitScope Micro Video Tutorial with Farnell element14Nov 10
BitScope
BitScope Micro and Raspberry Pi at electronica 2014!Nov 06
BitScope
BitScope Micro element14 Webinar Review.Nov 03
BitScope
BitScope Micro Webinar with element14!Oct 29
BitScope
element14 launches BitScope Micro for Raspberry Pi!Oct 27
BitScope
BitScope Micro Diagnostic Port Explained.Aug 16
Raspberry
MagPi talks Raspberry Pi B+, HATs & BitScope.Aug 04
Raspberry
Raspberry Pi B+ BitScope x 4 = 8 analog + 32 logic !Aug 01
BitScope
BitScope Server, shared remote access for any BitScope!Dec 15
Software
BitScope DSO, Logic, Chart, Meter and Library updatedNov 12
Raspberry
Automated Waveform Analysis with Raspberry PiNov 09
BitScope
Reducing Quantization Noise with BitScopeNov 08
Software
BitScope Software upgraded for Mac OS X MavericksNov 06
BitScope
Sydney BitScope, Online Demo Updated.Oct 30
More...