BitScope Blade Duo Pi

Power and mount two Raspberry Pi and USB peripherals.

BitScope Blade BB02 is a power and mounting solution for two Raspberry Pi and (optionally) Touchscreen Display.

It's perfect for building industrial strength stand-alone fail-safe server solutions with Raspberry Pi.

BitScope Blade 02, Duo Pi, Power & Mounting for two Raspberry Pi (Raspberry Pi not included).

Key Features

  • Powers up to two Raspberry Pi.
  • Works with Pi 7" Touch Display.
  • Powerful switch mode supply.
  • Can use 9V to 48V power source.
  • Compatible with 12V & 24V UPS.
  • Use with standard PoE solutions.
  • Power external USB HDD & SSD.
  • Up to 8 connected USB devices.
  • Rack mount solutions available.
  • 4 x 3mm mounting + stand-offs.
  • Power tabs for "cable free" use.
  • Low cost, light weight and generates very little heat.
  • A complete industrial quality, reliable power and mounting solution for Raspberry Pi.

Product Overview

BitScope Blade Duo Pi is a rack and wall mountable power solution for a pair of Raspberry Pi computers.

BitScope Blade 02, Duo Pi, Power & Mounting for two Raspberry Pi (Raspberry Pi not included).

Duo Pi solves the power problem when using Raspberry Pi in industrial and related mission critical applications.

It has a built-in 5V switch mode power supply capable of powering two Raspberry Pi and up to eight USB devices which are be connected via the Raspberry Pi.

Such devices can include almost any type of USB hard disk (HDD) or solid-state drive (SSD). Of course any USB powered BitScope (such as BitScope Micro) other peripherals such as keyboards, mice, WiFi and Bluetooth dongles can all be used.

Duo Pi accepts supply voltages ranging from 9V to 48V making it compatible with 9V, 12V, 24V and 48V power sources.

It can be used with simple plug packs, 12V batteries, low cost uninterruptible power supplies (UPS) and even passive power over ethernet (PoE) solutions. Duo Pi can even be used to power and mount the Raspberry Pi 7" Touchscreen Display, two Raspberry Pi, and up to four BitScopes!

BitScope Blade 02, Duo Pi, Power & Mounting for two Raspberry Pi (Raspberry Pi not included).

BitScope Blade Server Packs

A set of five BitScope Blade Duo Pi can be configured as a 10 node compute cluster pack with Raspberry Pi.

BitScope Blade Pack 10, Power & Mounting for 10 Raspberry Pi (Raspberry Pi not included).

The mounting plates are connected to V+ (top) and GND (base) on each blade. The insulating mounting posts on the plates mean that by simply connecting 9V to 48V to the top plate, the entire cluster can be powered without any additional wiring. The base plate also has cut-outs to run HDMI cables allowing up to 5 monitors to be connected to each cluster. Two pack can be mounted side-by-side in a 19" rack to build a Blade Rack 20 server just 5RU high.

BitScope Blade Rack 20, Power & Mounting for 20 Raspberry Pi (Raspberry Pi not included).

Specifications

Product Name BB02 BitScope Blade Duo Pi
Compatible Raspberry Pi Models Raspberry Pi 3, 2, B+, A+ and Pi Zero
Supports Raspberry Pi Display Yes (optional wall mount).
Raspberry Pi per Unit 2
USB Ports per Unit 8
HDMI & sound outputs Yes (Raspberry Pi slot 1)
Primary Power 5V (Raspberry Pi J8 & USB)
Auxilliary Power Yes (5V via header)
Indicator LEDs Board Power & Devices Available
Device power-down header Yes
Processor reset/interrupt Yes
Blade mount tabs Vcc & Gnd with M3 holes
Raspberry Pi mounts M2.5 per HAT specification
Mounting feet included Yes
19" rack compatible 5RU (with metalwork option)
DIN Rail compatible Yes (with DIN rail option)
Power budget 4A (peak), 3A (continous)
UPS compatible Yes (includes blocking diode)
PoE compatible Yes (with passive PoE cable)
Power Requirement 9V (4A) ~ 48 V (500mA)
Operating Temperature 0 °C to 40 °C
Storage Requirements -40 °C ~ +40 °C / 5 % ~ 95 % RH
Dimensions (W x D x H) 65 x 160 x 25 mm
Weight (Net) 64g

EL04C 01 FB26L 05

Related Posts

BitScope
Farnell element14 interviews BitScope CEO Bruce TullochMar 29
BitScope
How to assemble and get started using BitScope Blade.Feb 20
Raspberry
Heatwave no problem for BitScope Blade and Raspberry Pi !Feb 10
BitScope
Raspberry Pi Applications built with BitScope Blade.Feb 6
BitScope
BitScope Designs and element14 launch new Blade for Raspberry Pi !Jan 23
Education
BitScope, Blade & Raspberry Pi at the Sydney Maker Faire!Aug 20
BitScope
Physical Computing with BitScope, Blade and Raspberry Pi.May 27
Raspberry
Build servers with Raspberry Pi and BitScope Blade.Mar 16
BitScope
Raspberry Pi 3 Model B unboxed & reviewed with Duo Pi.Mar 07
Raspberry
Raspberry Pi 3 Launch and BitScope BladeFeb 29
BitScope
Physical Computing with Raspberry Pi and BitScope!Dec 01
Raspberry
BitScope Micro with Raspberry Pi Touchscreen Display!Sep 09
Raspberry
BitScope, Ozberry & Pimoroni at Sydney Mini Maker Faire!Aug 12
Raspberry
BitScope Blade for Raspberry Pi at Hannover Maker Faire!Jun 05